This is the Robo-Tank 120v-240v AC power bar for the deluxe controller and comes fully assembled.
It has 8 switchable outlets, 5 have a heavy duty snubber protecting the relay from inductive loads such as pumps. It's safely constructed containing no wires internally and is housed in a 3D printed case. Power bar board and outlets can be easily removed from case.Available with North American and Australian outlets, both are 240v compatible so adapters for your country can be used.
- 8 Outlet AC power bar installed in case - select style on right side
- Straight Through DB9 9 pin male to female Serial cable to connect power bar to controller - EXAMPLE
- AC Power Cord to power up AC power bar - EXAMPLE
3D Printed Cases and Face Plate
The power bar comes in a 3D printed case, choose a color of your choice on the right side. There many be small defects due to 3D printing but any will be minor and only have a visual effect.
8 Outlet AC Power Bar Circuit Board
The AC power bar circuit board can handle 10 Amp at 120v - 240v, The power bar has no wires internally and is protected with a replaceable 10 Amp fuse. 5 of the 8 relays are protected with a heavy duty snubber so they won't be damaged from inductive loads such as motors.
- 8 switchable outlets
- On board 5x20mm replaceable 10 Amp fuse
- 120v - 240v AC Input / Output
- Each outlet can support up to 10 Amps
- Power Bar can support up to 10 Amps maximum between all 8 outlets
- Heavy duty snubbers protecting 5 relays from inductive loads
- Connects to controller using a straight through DB9 9 pin male to female Serial cable (not included)
Robo-Tank 120v-240v AC Power Bar Fully Assembled
- Product Code: AC_assembled
- Availability: In Stock