This is the Robo-Tank 120-v240v AC power bar in a DIY format. All the components are mounted, you job is to solder the IEC-320 AC power input socket and 8 AC outlets.  If you have experience with basic soldering such as header pins you should have no trouble with this. Here's a link to the assembly manual so you see what's involved.

AC Power Bar Assembly Manual - US

AC Power Bar Assembly Manual - Universal

3D Printed Case Models

Available with 8 North American or 6 Universal outlets for use in most countries. The power bars use high quality Omron relays, includes a replaceable fuse and has no wires internally for safety and reliability. 

Note: The universal AC power bar only has 6 outlets due to size and spacing required for UK plugs. 

North American Package Includes

• AC Power Bar Kit 
• 1 – Robo-Tank AC Power Bar Circuit Board
• 8 – North American AC outlets - select style on right side
• 1 – 10 amp fuse
• 1 – IEC-320 AC power socket
• 22 – m2.5 x 6mm screws
• 2 – m2.1 x 16mm screws

Universal Package Includes - Click to view the Universal AC socket compatibility chart to see if it's safe for your country.

• AC Power Bar Kit 
• 1 – Robo-Tank AC Power Bar Circuit Board
• 6 – Universal AC outlets - select style on right side
• 1 – 10 amp fuse
• 1 – IEC-320 AC power socket
• 21 – m2.5 x 6mm screws
• 2 – m2.1 x 16mm screws

Parts Required

• Straight Through DB9 9 pin Serial cable to connect power bar to controller - EXAMPLE
• AC Power Cord to power up AC power bar - EXAMPLE

3D Printed Case

I've designed a case to house the AC power bar that you can 3D print yourself or order one on the right side of the page. If you purchase a case there many be small defects due to 3D printing but any will be minor and only have a visual effect.

Details

6 or 8 Outlet AC Power Bar Circuit Board

The AC power bar circuit board can handle 10 Amp at 120v - 240v, The power bar has no wires internally and is protected with a replaceable 10 Amp fuse. Each of the 8 relays are protected with a heavy duty snubber so they won't be damaged from inductive loads such as motors. 

• 6 or 8 switchable outlets
• On board 5x20mm replaceable 10 Amp fuse
• 120v - 240v AC Input / Output
• Each outlet can support up to 10 Amps
• Power Bar can support up to 10 Amps maximum between all 8 outlets
• Heavy duty snubbers protecting 5 relays from inductive loads
• Connects to controller using a straight through DB9 9 pin Serial cable (not included)