This listing is for the deluxe sensor extension. It's compatible with the Robo-Tank controller and can be used as is for your own projects. You can connect one of these to the controller using the included cable, if you want to run 2-3 of these you would need a $10 adapter which will be available soon.

The deluxe sensor extension has 6 ports total, each port has 3 plug types you can use simplifying things and removing the headache of cutting up cables. Set the jumper for each port to the sensor plug you want to use and plug in your sensor. 

If you use a DS18B20 temperature sensor you need to add a line to your /boot/config.txt file on the Raspberry Pi to enable additional 1-wire bus. Running DS18B20 on their own 1-wire bus is recommended so sensors don't interfere with each other and run independently. You can find this information in the user manual.

To use the deluxe sensor extension with your own project each module needs 6 GPIO pins from the Raspberry Pi, +5v and a common Ground. 

Deluxe Sensor Extension User Manual

Package Includes

  • Deluxe sensor extension installed in 3D printed case with faceplate
  • 3ft Ethernet patch cable 
  • 6, 3 pin pluggable screw terminal connectors

3D Printed Cases and Face Plate

The sensor extension come in a 3D printed case, choose your choice of color on the right side. There many be small defects due to 3D printing but any will be minor and only have a visual effect.


Deluxe Sensor Extension Details

With the deluxe sensor extension you can run 6 sensors, each sensor port has 3 available plug types to match your sensor keeping it plug and play. Simply set the jumper for each port to the plug type you wish to use. You can choose between the optical sensor plug, non-contact sensor plug or the pluggable screw terminal connector which is great for DS18B20 temps sensors or other Arduino based sensors.

  • 6 sensor ports total
  • 6 dedicated plugs for optical sensors 
  • 6 dedicated plugs for non-contact sensor
  • 6 pluggable screw terminal plugs for other sensor types

Compatible with the following sensors

  • Dedicated plug for Optical Sensors
  • Dedicated plug for Non-Contact Sensors
  • Universal plug for DS18B20 Temperature Sensors
  • Universal plug for Water Sensor Boards
  • Universal plug for other Arduino based water sensors

Write a review

Please login or register to review

Reef-pi Deluxe Sensor Extension Fully Assembled

  • Product Code: PPSensorExt
  • Availability: In Stock
  • { price }}


Available Options

Name Product Quantity Price
DS18B20 Waterproof Digital Temperature Sensor Probe 3 meter cable + $8.95 USD
Optical Water Level Sensor + $10.95 USD
Reversible Float Switch + $3.49 USD
XKC-Y25-V Non-Contact Water Sensor + $14.49 USD
Total Box:

Name Product Quantity Price
Black
Green
Silver
Red
Blue
Yellow
Orange
White
Custom Color
Total Box:


Related Products

Robo-Tank Isolated pH Circuit for reef-pi

Robo-Tank Isolated pH Circuit for reef-pi

This is a precise, fully isolated pH circuit constructed using high quality components and designed ..

$39.95 USD $49.95 USD

Reef-pi Extension - 6 DC Ports + 2 Sensor Ports Fully Assembled

Reef-pi Extension - 6 DC Ports + 2 Sensor Ports Fully Assembled

This is a great addition to Robo-Tank or any reef-pi DIY build, it allows you to switch 6 DC powered..

$39.95 USD

Reef-pi Extension - 2 DC Ports + 6 Sensor Ports DIY

Reef-pi Extension - 2 DC Ports + 6 Sensor Ports DIY

This is a great addition to Robo-Tank or any reef-pi DIY build, it allows you to switch 2 DC powered..

$24.95 USD

Reef-pi Basic Aquarium Controller Fully Assembled

Reef-pi Basic Aquarium Controller Fully Assembled

This is the controller fully assembled, simply plug in your Raspberry Pi and power up the controller..

$89.95 USD

Reef-pi Equipment Extension Fully Assembled

Reef-pi Equipment Extension Fully Assembled

This listing is for the equipment extension. It's compatible with the Robo-Tank controller and can b..

$49.95 USD

Tags: reef-pi, deluxe, aquarium, controller, power, bar, fully, assembled, plug, and, play, hardware