This listing is for the deluxe sensor extension PCB circuit board and comes fully assembled. It's compatible with the Robo-Tank controller and can be used as is for your own projects. You can connect one of these to the controller using the included cable, if you want to run 2-3 of these you would need a $10 adapter which will be available soon.

The deluxe sensor extension has 6 ports total, each port has 3 plug types you can use simplifying things and removing the headache of cutting up cables. Set the jumper for each port to the sensor plug you want to use and plug in your sensor. 

If you use a DS18B20 temperature sensor you need to add a line to your /boot/config.txt file on the Raspberry Pi to enable additional 1-wire bus. Running DS18B20 on their own 1-wire bus is recommended so sensors don't interfere with each other and run independently. You can find this information in the user manual.

To use the deluxe sensor extension with your own project each module needs 6 GPIO pins from the Raspberry Pi, +5v and a common Ground. 

Deluxe Sensor Extension User Manual

Package Includes

  • Deluxe sensor extension circuit board
  • Faceplate

Deluxe Sensor Extension Details

With the deluxe sensor extension you can run 6 sensors, each sensor port has 3 available plug types to match your sensor keeping it plug and play. Simply set the jumper for each port to the plug type you wish to use. You can choose between the optical sensor plug, non-contact sensor plug or the pluggable screw terminal connector which is great for DS18B20 temps sensors or other Arduino based sensors.

  • 6 sensor ports total
  • 6 dedicated plugs for optical sensors 
  • 6 dedicated plugs for non-contact sensor
  • 6 pluggable screw terminal plugs for other sensor types

Write a review

Please login or register to review

Reef-pi Deluxe Sensor Extension - DIY Kit

  • Product Code: DIYSensorV3Ra
  • Availability: In Stock
  • { price }}


Available Options

Name Product Quantity Price
DS18B20 Waterproof Digital Temperature Sensor Probe 3 meter cable + $8.95 USD
Optical Water Level Sensor + $10.95 USD
Reversible Float Switch + $3.49 USD
XKC-Y25-V Non-Contact Water Sensor + $14.49 USD
Total Box:


Related Products

Reef-pi Deluxe Aquarium Controller - Complete Kit

Reef-pi Deluxe Aquarium Controller - Complete Kit

This package contains everything you need to get Robo-Tank up and running, simply add your probes, s..

$189.95 USD $209.95 USD

Reef-pi Basic Aquarium Controller Fully Assembled

Reef-pi Basic Aquarium Controller Fully Assembled

This is the controller fully assembled, simply plug in your Raspberry Pi and power up the controller..

$79.95 USD

Reef-pi Deluxe Aquarium Controller with AC Power Bar Fully Assembled

Reef-pi Deluxe Aquarium Controller with AC Power Bar Fully Assembled

This package is for the deluxe aquarium controller kit, it's a stripped down kit as you may already ..

$199.95 USD

Reef-pi Basic Aquarium Controller with AC Power Bar Fully Assembled

Reef-pi Basic Aquarium Controller with AC Power Bar Fully Assembled

This package is the basic aquarium controller kit, it's a stripped down kit as you may already have ..

$159.95 USD

Tags: reef-pi, deluxe, aquarium, controller, power, bar, fully, assembled, plug, and, play, hardware