Posts: 25
Threads: 3
Likes Received:
0 in 0 posts
Likes Received:
0 in 0 posts
Reputation:
1
Joined: Dec 2015
Country:
Does the information show on the controller screen?
Posts: 3,250
Threads: 90
Likes Received:
163 in 120 posts
Likes Received:
163 in 120 posts
Reputation:
184
Joined: Sep 2015
Country:
Hi Majid, if you can feed the fish from the internet its working ok. There's a small bug so do the following.
From the home page press "settings", "customize", "outlets" and then exit the screen.
As soon as you exit the screen all the outlets should fill in, you can keep the webpage open when you do it.
I think there could be an issue with the network info but that doesn't affect anything. I think its having trouble retrieving your external IP, I'll be looking into it soon.
Posts: 3,250
Threads: 90
Likes Received:
163 in 120 posts
Likes Received:
163 in 120 posts
Reputation:
184
Joined: Sep 2015
Country:
I just checked that test sketch that you ran, there is a problem communicating from the ethernet board to the power bar board. I'm not sure how you setup the logic level converters but you need to check the connections between the ethernet due and mega.
The test sketch should output this when its working.
Initializing sd card...
SUCCESS - sd card initialized.
Wait 5 seconds for test to begin
Serial1 Sent Signal to Power Bar
Serial1 Received Signal From Power Bar
Serial1 Working
Serial2 Sent Signal to Power Bar
Serial2 Received Signal From Power Bar
Serial2 Working
Checking Expansion Hub
________________________ you need the two lines below to show up next.
Ethernet Hub Successful
Test Complete
It doesn't matter about twitter ID, that's only for web alerts.
Posts: 3,250
Threads: 90
Likes Received:
163 in 120 posts
Likes Received:
163 in 120 posts
Reputation:
184
Joined: Sep 2015
Country:
There's definitely a problem then. Not sure how you have it setup but its there somewhere, you come this far, almost there, you'll get it.
Posts: 436
Threads: 23
Likes Received:
8 in 8 posts
Likes Received:
8 in 8 posts
Reputation:
8
Joined: Sep 2015
Country:
and is your Ph really 4.36 that is almost acid
Posts: 436
Threads: 23
Likes Received:
8 in 8 posts
Likes Received:
8 in 8 posts
Reputation:
8
Joined: Sep 2015
Country:
glad to hear it was for testing only