Posts: 164
Threads: 6
Likes Received:
9 in 9 posts
Likes Received:
9 in 9 posts
Reputation:
9
Joined: Nov 2015
Country:
Hi Rob,
I am making DIY leds light and i have got RCD-24 Recom drivers. After first trials, it works on the other side, 255 leds off and 0 leds on... Is it due to those drivers?
Dom.
Posts: 164
Threads: 6
Likes Received:
9 in 9 posts
Likes Received:
9 in 9 posts
Reputation:
9
Joined: Nov 2015
Country:
Same result and it seems that Recom rcd drivers work at the opposite of Meanwell LDD drivers. When i apply 10v, leds come off and with 0v they are on. I guess it is difficult, but are there some lignes i could change on your code, to reverse that? Otherwise i need to change for LDD.
Posts: 3,250
Threads: 90
Likes Received:
163 in 120 posts
Likes Received:
163 in 120 posts
Reputation:
184
Joined: Sep 2015
Country:
That's no good. I'm leaving for the day but when I get back I'll take a look and see what you can change to get them working.
Posts: 3,250
Threads: 90
Likes Received:
163 in 120 posts
Likes Received:
163 in 120 posts
Reputation:
184
Joined: Sep 2015
Country:
Hi Dom, well I hate to say it but it would be a lot of work to flip the voltages around. The way it works is a value of 4095 is sent to the IC for full power and 0 is sent for no power. So this would need to be reverse, the problem is there are many instances where the value is sent. If you give me a few weeks I can try and make an option so they work opposite. You should still be able to use those drivers if you don't mind setting your options in reverse on the display.
Posts: 3,250
Threads: 90
Likes Received:
163 in 120 posts
Likes Received:
163 in 120 posts
Reputation:
184
Joined: Sep 2015
Country:
I would like to get it working for those drivers, in the end I hope all drivers to work with it. I need a few weeks because I'm quite busy right now, work has picked up some as well but I will take a look at it.