05-04-2016, 09:56 PM
Ok, I reloaded all of the Robo-Tank sketches, switched patch cables and connected it all up...still same problem. So I connected just the display board and DUE and checked voltages.
Ethernet Port Voltages
pin 8 - 12v
pin 5 - 3.2v
pin 3 - 5.03v
I checked both TX1 & TX2 on the DUE and bother are outputting 3.3v.
Thanks for the help.
Ethernet Port Voltages
pin 8 - 12v
pin 5 - 3.2v
pin 3 - 5.03v
I checked both TX1 & TX2 on the DUE and bother are outputting 3.3v.
Thanks for the help.