05-05-2016, 11:04 PM
Ok, in an effort to solve this problem I went ahead and reloaded all the sketches...even ran the EEPROM_clear sketch on the Mega.
I reconnected everything and switched to another patch cable. Checked all of the voltages on the patch cable prior to connecting to the Connector board and everything matches the above results.
Went ahead and re-checked the voltages on IC2 on the Power Bar board. Results below:
Any thoughts with the new information? Thanks for the help
I reconnected everything and switched to another patch cable. Checked all of the voltages on the patch cable prior to connecting to the Connector board and everything matches the above results.
Went ahead and re-checked the voltages on IC2 on the Power Bar board. Results below:
Any thoughts with the new information? Thanks for the help