06-18-2017, 03:20 PM
Overwriting the existing library is the same as removing and replacing, same with the files on the SD cards. If the sketches compile and upload all the files are set correctly, I sent that library again just in case as there's a setting in it which enables a certain about of alarms, possible yours wasn't set correct. I have a bunch of schedules set and all have been logged, I haven't been able to miss a schedule yet so its difficult trying to find it. In the log on the sketch I sent you I added a line that should be added after the pump starts, this is when the next schedule time is set. This will tell us if the schedule is being set.