09-15-2020, 04:36 AM
(09-15-2020, 12:35 AM)Rob F Wrote: Hi Dukereef, in the picture on R10 is there 3.3v when on and 0v when off?[quote pid='5727' dateline='1600151731']
1.5v is better but the transistor probably needs about 2v to switch. Any chance you have other resistor values to try?
Yep I will go to the shop tomorrow and buy other resistors. what do you recommend?
[/quote]
2.8v on bridged - 0vdc off (38.0 mV)