First Display-Test with 5“and 7“ CTE CPLD TFTs on Due

[Aquadet]

Hello,
I have testet 5“ and 7“ CTE CPLD Tft ́s on CTE Shield for Due.
First, for use this Displays you must cange the UTFH Librarie and the UtouchCD.h in the Utouch
Librarie. (The Files has Rob)

Call in Sketch:
UTFH myGLCD (CTE50CPLD, 25, 26, 27, 28); //For 5“ CPLD

UTFH myGLCD (CTE70CPLD, 25, 26, 27, 28); //For 7“ CPLD

UTouch myTouch (6, 5, 4, 3, 2); // Pins for 5“ and 7“ Touch





Regards
Detlef

[Rob F]

Hi Detlef, looks good! Info for the temperatures will show up when you connect it to the mega. The red plug under the time should go green when its all good.

[majid.gh]

Hi Detlef , very good

[elfuse79]

Ciao,
ho testet 5 "e 7" CTE CPLD Tft s su CTE Shield per Due.
In primo luogo, per l'uso di visualizzare questo è necessario cange il UTFH Librarie e il UtouchCD.h nel uTouch
Librarie. (Il file ha Rob) Chiamata in Sketch: UTFH myGLCD (CTE50CPLD, 25, 26, 27, 28); // Per 5 "CPLD myGLCD UTFH (CTE70CPLD, 25, 26, 27, 28); // Per 7 "CPLD uTouch myTouch (6, 5, 4, 3, 2); // Pins per 5 "e 7" touch Saluti Detlef

---

hi for print the image in to the display .bmp or .jpg which library you used? tx best regards

[rott]

I believe all the libraries came from http://www.rinkydinkelectronics.com/library.php UTFT and UTOUCH I don't believe they where alerted but Rob might of need to can you

If your talking about making the little icon pic's I know each one was made in Photoshop then saved then used a raw tool to convert it of storage on sd card

[Rob F]

Hi elfuse79, if you have any more questions feel free to ask.