Power Bar Outlets 1 and 2 not working?

[Coloredrock]

I re installed using your new script that you modified and posted last night to make sure it wasn't an idiot behind the key board error..any suggestions?  BTW really enjoying it... will be easier to sleep at night once I get the email alerts up and running.  Thanks again! 3-8 work fine BTW.

---

running 4.3, on Raspberry Pi 4 Model B Rev 1.2  I have also tried it on 5.1

Here is a screen shot of the config:
   

---

[Rob F]

Hi, I think it's some missing jumpers. If you look on the controller there are 2 ports, AC Backup 1 and AC Backup 2. You need to add a jumper to each of those otherwise the outlets will be off. These backup ports are designed for a float switch or other type of switch so there's a backup to turn them off.

[Coloredrock]

Hi, I think it's some missing jumpers. If you look on the controller there are 2 ports, AC Backup 1 and AC Backup 2. You need to add a jumper to each of those otherwise the outlets will be off. These backup ports are designed for a float switch or other type of switch so there's a backup to turn them off.

Awesome thanks Rob will take a look when I get a chance.. and will let you know.... thanks for the help!

[Rob F]

Sounds good.