05-08-2022, 07:45 PM
Ah yes those addresses make sense now, they can be anything so that's ok. What is the "i" command for? I know the R is to read it.
Have you tried adding extra ph-Ezo drivers in reef-pi for the other circuits? For sure you can read from the Atlas circuit with reef-pi, add a driver with that address (decimal value not hex), then add an analog connector using that driver, then go to admin tab and press reload button then add it to the pH tab and see if you get a reading. Reef-pi send "R" to pH so in theory it should return something from all the circuits, not sure why I didn't suggest this first.
The one I'm really unsure about is the EC as that circuit puts out 4 parameters so maybe reef-pi only pulls in the first and discard the remaining. If the others work we can setup extra script just for EC.
Have you tried adding extra ph-Ezo drivers in reef-pi for the other circuits? For sure you can read from the Atlas circuit with reef-pi, add a driver with that address (decimal value not hex), then add an analog connector using that driver, then go to admin tab and press reload button then add it to the pH tab and see if you get a reading. Reef-pi send "R" to pH so in theory it should return something from all the circuits, not sure why I didn't suggest this first.
The one I'm really unsure about is the EC as that circuit puts out 4 parameters so maybe reef-pi only pulls in the first and discard the remaining. If the others work we can setup extra script just for EC.
