10-06-2015, 11:28 AM
Oh the day has come and I have recieved the package from Rob 
First thought was wau that's big....
Hooked it up to 7" ebay bought lcd, connected all up and HELLO..... IT'S ALIVE
![[Image: IMG_20151006_184653.jpg]](http://s2.postimg.org/uuyyjf15x/IMG_20151006_184653.jpg)
So far I have connected only 2 DS18B20 temp sensors and a 8ch relay. trying to figure out where to connect PH sensor??
![[Image: IMG_20151006_184825.jpg]](http://s2.postimg.org/tjr7ay5k5/IMG_20151006_184825.jpg)
![[Image: IMG_20151006_184903.jpg]](http://s2.postimg.org/4p7pgvkpx/IMG_20151006_184903.jpg)
Here are some pictures of the current progress:
![[Image: IMG_20151006_184920.jpg]](http://s2.postimg.org/7fcg0bs11/IMG_20151006_184920.jpg)
![[Image: IMG_20151006_184932.jpg]](http://s2.postimg.org/428srcntx/IMG_20151006_184932.jpg)
Had an idea to try it out so i have connected the LCD part to a Sensor part with a 7m UTP CAT5e patch cable and it works without a problem so far.
![[Image: IMG_20151006_184834.jpg]](http://s2.postimg.org/qzvkgui05/IMG_20151006_184834.jpg)
Rob did a wery good yob in all this but as this is in beta stage and I promissed him I would stress test this, I have found so far only beauty mistakes that needs some atention and little code repair. Below are some shedules mistakes:
![[Image: IMG_20151006_185530.jpg]](http://s2.postimg.org/qefsc81ph/IMG_20151006_185530.jpg)
![[Image: IMG_20151006_185509.jpg]](http://s2.postimg.org/gekvwbqg5/IMG_20151006_185509.jpg)
![[Image: IMG_20151006_185501.jpg]](http://s2.postimg.org/4qqu1s1b9/IMG_20151006_185501.jpg)
![[Image: IMG_20151006_185415.jpg]](http://s2.postimg.org/i3tz4e65h/IMG_20151006_185415.jpg)
![[Image: IMG_20151006_185315.jpg]](http://s2.postimg.org/6srbg0zad/IMG_20151006_185315.jpg)
![[Image: IMG_20151006_185452.jpg]](http://s2.postimg.org/z2yc5wrz9/IMG_20151006_185452.jpg)
That's all for now, will play with it for a while but I love already.
Now to build an enclosure for the LCD and the sensor board.
First thought was wau that's big....
Hooked it up to 7" ebay bought lcd, connected all up and HELLO..... IT'S ALIVE
So far I have connected only 2 DS18B20 temp sensors and a 8ch relay. trying to figure out where to connect PH sensor??
Here are some pictures of the current progress:
Had an idea to try it out so i have connected the LCD part to a Sensor part with a 7m UTP CAT5e patch cable and it works without a problem so far.
Rob did a wery good yob in all this but as this is in beta stage and I promissed him I would stress test this, I have found so far only beauty mistakes that needs some atention and little code repair. Below are some shedules mistakes:
That's all for now, will play with it for a while but I love already.
Now to build an enclosure for the LCD and the sensor board.
