03-08-2021, 04:07 PM
(03-08-2021, 12:30 PM)zee_zout Wrote: Hi Rob,
My LEDs works perfect, with 2 outputs, one for blue and one for whote light.
But the light intensity has dropped, probability because the output from the driver is 12V/5A.
You have mentioned here that i could use an external power supply.
Can I re-use this 12V/5A, If so, How?
Kind regards,
Jimmy
Hey Jimmy, glad to hear it's working. I'm a little confused, originally I thought the power supply was 20v but if it's only 12v that's what you should be getting out the controller so changing to an external 12v power supply would be the same results.
With the light at 100% do you still get 12v on the DC port or has it dropped to 10v or something? If so the power supply on controller doesn't have enough current and should be running warm/hot. If the polarity for your 12v/5a power supply matches controller, center positive, you can use it on the controller.
Do you have a link for the light to see the specs?