Display does not connect!

[roland33]

Hello Rob,

Thanks for your help!!

I install the scetches, the result you can see on the screenshot.
I test it many times an I use a different ethernetshield, the result is always the same!

After a short time the IC2 is getting so hot that I have to stop the Test, because it begann to smelll.
I blow the whole time, to cool the IC's, without them it is not able to test it!

You send me IC's with a point on it ad I install them in the right position!

The SD-card works correct, I tested it

[Rob F]

I have some IC's with no markings that's why I asked. Definitely something shorting out, I don't know if you're up to it but if you remove IC2 is the heat gone? Only thing I can suggest is replacing all the IC's again or you'll need new boards. Because there's no communications all the other tests on controller fail because display can't get the response.

[roland33]

Hello Rob,

sorry, I changed all IC's again, but it is always the same :-((

Please tell me the price for new boards and porto so I would start from beginning....

Have a nice day!

roland

[Rob F]

Hi Roland, I sent you a private message. Have a nice day as well.