06-20-2019, 08:12 PM
Well that's not good, how long did you let it sit with one dot? It could just be waiting to connect to the network and almost sounds like what's happening. Two things can make it hang at startup, connecting to network but this will time out in 30-60 seconds and then the display will startup. The 2nd is if the I2C goes unresponsive. Sometimes after programming something happens to the Arduino and the I2C doesn't work so the controller doesn't start because it gets stuck trying to read the eeprom. Completely powering it down will fix it and it shouldn't happen again. In your case it sounds like the 1st. If this happens again can you let it sit with splash screen and see if it eventually starts, that sounds funny. :) If it does and it was web related the web will auto disable and that problem shouldn't happen again unless you enable web and it continues to have issues.
Did you use the web features in v4.2? Since you've disabled has it continued working?
Did you use the web features in v4.2? Since you've disabled has it continued working?
