10-16-2021, 04:37 PM
I think I need the 'tutorial' first. I don't feel like I have anything set up right. Let's start simple and bypass the AC on/off feature and the dimming feature and just have the controller turn the lights on during a particular interval.
To configure my control port I did:
Configure Ports-> Click on PWM 1/Analog Port 1 -> Name = Main Lighting, Function = Light, Enabled = yes
and I set the icon to look like a hanging light.
Odd, I think, that there is no way for me to tell the program if this is PWM or Analog. So, I click on Advanced and click the edit icon for GPIO 0, but find nothing about PWM or Analog here, either.
Now, from the home screen, I click on the Lights icon and add a Main Lighting mode to come on at 14:00 and end at 23:59, but I see no way to specify ramp/diurnal/etc, nor do I see a way to connect the light mode with the port that I just configured.
In short, I don't understand the conceptual model for setting this up.
-Phil
To configure my control port I did:
Configure Ports-> Click on PWM 1/Analog Port 1 -> Name = Main Lighting, Function = Light, Enabled = yes
and I set the icon to look like a hanging light.
Odd, I think, that there is no way for me to tell the program if this is PWM or Analog. So, I click on Advanced and click the edit icon for GPIO 0, but find nothing about PWM or Analog here, either.
Now, from the home screen, I click on the Lights icon and add a Main Lighting mode to come on at 14:00 and end at 23:59, but I see no way to specify ramp/diurnal/etc, nor do I see a way to connect the light mode with the port that I just configured.
In short, I don't understand the conceptual model for setting this up.
-Phil