09-03-2020, 10:20 AM
Sorry for long reply, sometimes the forum doesn't email me.
Here's the manual for RevA, I thought you had B because you listed sensor 6, RevA only has 5 sensors but pin numbers are the same.
https://docs.google.com/document/d/1JTJu...=h.3j2qqm3
Here's a link to all the manuals.
https://www.robo-tank.ca/reef-pi_Related_User_Manuals
I assume you have the 6th sensor because you ran the install script that added connectors to reef-pi, you can delete that connector. Instead that pin is controlling DC port 9 (one of the header pins) so you can leave it until you plan to use it but I'm guessing there's enough other DC ports you'll probably never use it.
Things can be a little confusing at first with connectors but they are powerful and after a while they will make more sense, same with Macros.
Here's the manual for RevA, I thought you had B because you listed sensor 6, RevA only has 5 sensors but pin numbers are the same.
https://docs.google.com/document/d/1JTJu...=h.3j2qqm3
Here's a link to all the manuals.
https://www.robo-tank.ca/reef-pi_Related_User_Manuals
I assume you have the 6th sensor because you ran the install script that added connectors to reef-pi, you can delete that connector. Instead that pin is controlling DC port 9 (one of the header pins) so you can leave it until you plan to use it but I'm guessing there's enough other DC ports you'll probably never use it.
Things can be a little confusing at first with connectors but they are powerful and after a while they will make more sense, same with Macros.