08-18-2020, 06:02 PM
Hi Edwin, I think I had a translation issue, sounds like the floats don't work at all?
I recently realized the PU and PD labels on faceplate are backwards, PU is actually PD and vice versa. Having this jumper set wrong won't hurt anything but will stop it from working.
Try changing that jumper and see if it works. Having the other jumper to "other" is good.
Float should be connected to +5v and Data pin on sensor port.
If neither work, go to configuration then connectors and edit the sensor port connector, click the reverse option so it's enabled, save and 'reload' reef-pi.
I recently realized the PU and PD labels on faceplate are backwards, PU is actually PD and vice versa. Having this jumper set wrong won't hurt anything but will stop it from working.
Try changing that jumper and see if it works. Having the other jumper to "other" is good.
Float should be connected to +5v and Data pin on sensor port.
If neither work, go to configuration then connectors and edit the sensor port connector, click the reverse option so it's enabled, save and 'reload' reef-pi.