12-30-2021, 08:35 AM
Thank you, Rob, for your insight.
I ran your install script which successfully added all of the power ports. It's mostly working now, but i'm still having some difficulty.
Here is an image of the power bar, along with how it's connected to reef-pi. 6 of the outlets now work, but they are activated by a mix of power bar 1 and power bar 2 somehow. If i move the db9 cable to the bottom port on reef-pi, none of the switches activate.
https://imgur.com/a/WSwzane
This is the reef-pi setup under equipment:
https://imgur.com/a/Sg1qTQh
https://imgur.com/a/kJ0QEhg
Thanks for your help!
Matt
I ran your install script which successfully added all of the power ports. It's mostly working now, but i'm still having some difficulty.
Here is an image of the power bar, along with how it's connected to reef-pi. 6 of the outlets now work, but they are activated by a mix of power bar 1 and power bar 2 somehow. If i move the db9 cable to the bottom port on reef-pi, none of the switches activate.
https://imgur.com/a/WSwzane
This is the reef-pi setup under equipment:
https://imgur.com/a/Sg1qTQh
https://imgur.com/a/kJ0QEhg
Thanks for your help!
Matt