10-17-2021, 02:44 PM
Thanks for posting the config file, I believe my script made that mess, looks like it keeps adding lines every time it runs. Delete all the extra dtoverlay=w1-gpio lines, that will be causing the problem.
I see dtoverlay=pwm-2chan is also duplicated many times, remove them as well and any other duplicate lines you see. They probably aren't hurting anything but shouldn't be.
And for your lights, they should start changing in 6 hours 34 minutes assuming no modes have start/end times overlapping and the levels on each mode are different. I think you probably have them correct.
I see this as a duplicate as well.
dtparam=i2c_arm_baudrate=10000
The light countdown on dashboard won't update when lights change, you need to refresh dashboard to see next countdown.
I see dtoverlay=pwm-2chan is also duplicated many times, remove them as well and any other duplicate lines you see. They probably aren't hurting anything but shouldn't be.
And for your lights, they should start changing in 6 hours 34 minutes assuming no modes have start/end times overlapping and the levels on each mode are different. I think you probably have them correct.
I see this as a duplicate as well.
dtparam=i2c_arm_baudrate=10000
The light countdown on dashboard won't update when lights change, you need to refresh dashboard to see next countdown.