05-28-2016, 08:47 AM
(This post was last modified: 05-28-2016, 08:53 AM by dagsterbox.)
Alright.
For both I have about 2V.
I welded the floating switch on the usb connector. When the switch is on, I have 12 v, when it is off, there is no voltage.
I put the ato sensor in a grass of water with the floating switch Off but there is no voltage. I did the same with no water, same result.
May be the problem is coming from the sensor.
For both I have about 2V.
I welded the floating switch on the usb connector. When the switch is on, I have 12 v, when it is off, there is no voltage.
I put the ato sensor in a grass of water with the floating switch Off but there is no voltage. I did the same with no water, same result.
May be the problem is coming from the sensor.
