10-02-2020, 11:35 AM
(This post was last modified: 10-02-2020, 11:50 AM by Salmonetin.)
ok ...sorry i repost the original.. and sorry (estaba siguiendo unos tutoriales y videos y tenia lio...ahi lo tienes)
first at all...sorry for my bad english write...
i dont have an Fish Tank...but i like a lot your controller...
its inspirative for an diy grow controller too...
light controls and better climate controls... on economic way are actually my preferences
i know you use some old sensors
from my pov... with the BOSCH BME280 we have air temp air RH and barometric press... in one sensor...(this sensor is used on diy wheather stations too)
but seems to me with some calcs we can obtain DewPoint and VPD values
add an LST sensor (leaf surface temp with an cam sensor) or manually insert the values sensed with an IR temp meter gun...
actually sensing and monitoring the LST values...VPD values and Dewpoint values is higly recomended on advanced and actual grows...
seems to me you can go on that...and help to growers with an economic controller to follow VPD technics...
my pov on some sensor...
on temp sensors ...the PT1000...seems to me a great temp sensor
on temp and rh sensors ...and better than DTH22...i prefer the Sensirion SHT75 or better an BME280 for example
to monitorice plants there are profesional cams...
but seems to me we can go on Diy Cams too ...IR Cam... RGB Cam... UV cam.... multiespectra cams...
with raspis 4...we can add cams sensors etc...and go into domotic too...
there are other curious hardware or Dev Boards to add to the mix...
SMT32 seems to me helps on the accurate calcss with sensors...
ESP32 family... wifi and bluetooth (and more) on an Dev Board...lots of diferent and curious Dev Board (voice control ...Mesh nets..sensors on board...etc)
Meshtek Lab hardware (light and fan controllers 0-10V PWM etc)
Nordic Thingy52... lot of sensors... bluetooth...app for smartphone etc
but maybe you are only in the FishTank way and not like the Grow Controller...
then my time in this forum seems to me only to read
...tell me something...when you can or like...and thanks on advance...
Saludos de un viejo y pobre exelectricista canario que te sigue desde tus inicios...
first at all...sorry for my bad english write...
i dont have an Fish Tank...but i like a lot your controller...
its inspirative for an diy grow controller too...
light controls and better climate controls... on economic way are actually my preferences
i know you use some old sensors
from my pov... with the BOSCH BME280 we have air temp air RH and barometric press... in one sensor...(this sensor is used on diy wheather stations too)
but seems to me with some calcs we can obtain DewPoint and VPD values
add an LST sensor (leaf surface temp with an cam sensor) or manually insert the values sensed with an IR temp meter gun...
actually sensing and monitoring the LST values...VPD values and Dewpoint values is higly recomended on advanced and actual grows...
seems to me you can go on that...and help to growers with an economic controller to follow VPD technics...
my pov on some sensor...
on temp sensors ...the PT1000...seems to me a great temp sensor
on temp and rh sensors ...and better than DTH22...i prefer the Sensirion SHT75 or better an BME280 for example
to monitorice plants there are profesional cams...
but seems to me we can go on Diy Cams too ...IR Cam... RGB Cam... UV cam.... multiespectra cams...
with raspis 4...we can add cams sensors etc...and go into domotic too...
there are other curious hardware or Dev Boards to add to the mix...
SMT32 seems to me helps on the accurate calcss with sensors...
ESP32 family... wifi and bluetooth (and more) on an Dev Board...lots of diferent and curious Dev Board (voice control ...Mesh nets..sensors on board...etc)
Meshtek Lab hardware (light and fan controllers 0-10V PWM etc)
Nordic Thingy52... lot of sensors... bluetooth...app for smartphone etc
but maybe you are only in the FishTank way and not like the Grow Controller...
then my time in this forum seems to me only to read
...tell me something...when you can or like...and thanks on advance...
Saludos de un viejo y pobre exelectricista canario que te sigue desde tus inicios...
