09-08-2020, 12:18 PM
Hi Arron, the error on the connectors page is caused by running the lastest Raspberry Pi OS, unfortunately the last update has now made it into the main image file that gets downloaded from Raspberry Pi Imager so you'll need to download the image file and load it manually.
Here's a link to download.
http://downloads.raspberrypi.org/raspbia...buster.zip
Once that finishes open the Raspberry Pi Imager program but instead of selecting the "Raspberry Pi OS (other)" scroll to the bottom of the list and select "Use Custom". Then browse to the file you downloaded and continue from there.
Then you can run the install script to finish the setup.
Here's a link to download.
http://downloads.raspberrypi.org/raspbia...buster.zip
Once that finishes open the Raspberry Pi Imager program but instead of selecting the "Raspberry Pi OS (other)" scroll to the bottom of the list and select "Use Custom". Then browse to the file you downloaded and continue from there.
Then you can run the install script to finish the setup.
