Poll: Would you use a LUX Sensor for Light Brightness. NOT A PAR METER - Cost about $10 + Waterproofing
Yes
No
[Show Results]
 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Planning Final Hardware Phase
#27
(12-05-2015, 02:17 PM)robsworld78 Wrote: Wow 24 doses a day, guess I'm not going to out do it. But I can do 8 pumps haha... Looks like a cool controller, where did you get it? On mine it'll do less than 1ml and now up to 255ml. It was 99ml but in the next update that changes. I can't imagine someone wanting to dose a liter, with these pumps it would take an hour lol. What's the maximum you dose?

My max dosing is now 5x 30ml per day at 1 pump
The jebao dp4 is realy simpel in use. 
this little cpu is just a life clock.
You set the clock.
There is a manual mode. You can dose somthing with just pusching the number of the pump and it starts running.

Calibration mode. you need to dose exact 100ml of fluide. En stop the pump. Than it wil knowe howe many seconds is 100ml. aprox 170sec doses 100ml fluide.
Then when you go too program menu. It ask howe many dosings you like. 
I did  enter 5. Then it asks 5x what time you want to dose and  then howe many ml you want too dose in a single dosing Exampel
  1.00 -> 30ml (it runs for approx. 17.64 sec)
  9.00 -> 30ml
13.00 -> 30ml
17.00 -> 30ml
21.00 -> 30ml
             -----------
              150ml

I ordert it from www.fishstreet.com
IT costs 99$ i think. It has also a expension of 4 dosingpumps. 79$
The price can be wrong. Its just realy cheap. It works realy good. Lots of my friends own .

if you manage to coörperate this in your system. I wil have many buyers from belgium fur you. There is not muth of diy stuff availebel. In usa its realy easy too get evrithing. Belgium is a realy small country. And hard too get good diy materials. 

Grtz Dice
Reply to top


Messages In This Thread
Planning Final Hardware Phase - by Rob F - 10-24-2015, 09:58 PM
RE: Planning Final Phase - by Rob F - 10-24-2015, 10:57 PM
RE: Planning Final Hardware Phase - by rott - 10-25-2015, 08:25 PM
RE: Planning Final Hardware Phase - by Rob F - 10-25-2015, 11:35 PM
RE: Planning Final Hardware Phase - by Rob F - 10-26-2015, 12:52 AM
RE: Planning Final Hardware Phase - by Guest - 10-27-2015, 04:41 AM
RE: Planning Final Hardware Phase - by Rob F - 10-27-2015, 03:21 PM
RE: Planning Final Hardware Phase - by Rob F - 11-02-2015, 06:42 PM
RE: Planning Final Hardware Phase - by rott - 11-03-2015, 02:56 PM
RE: Planning Final Hardware Phase - by Rob F - 11-04-2015, 05:38 PM
RE: Planning Final Hardware Phase - by Dice - 12-03-2015, 10:07 AM
RE: Planning Final Hardware Phase - by Rob F - 12-03-2015, 08:49 PM
RE: Planning Final Hardware Phase - by rott - 12-03-2015, 10:55 AM
RE: Planning Final Hardware Phase - by Guest - 12-03-2015, 11:58 AM
RE: Planning Final Hardware Phase - by rott - 12-03-2015, 12:29 PM
RE: Planning Final Hardware Phase - by rott - 12-03-2015, 08:46 PM
RE: Planning Final Hardware Phase - by Rob F - 12-03-2015, 08:52 PM
RE: Planning Final Hardware Phase - by rott - 12-03-2015, 09:21 PM
RE: Planning Final Hardware Phase - by Dice - 12-04-2015, 08:12 AM
RE: Planning Final Hardware Phase - by Rob F - 12-04-2015, 09:42 AM
RE: Planning Final Hardware Phase - by rott - 12-04-2015, 10:43 AM
RE: Planning Final Hardware Phase - by Dice - 12-04-2015, 11:42 AM
RE: Planning Final Hardware Phase - by Rob F - 12-05-2015, 02:17 PM
RE: Planning Final Hardware Phase - by Dice - 12-05-2015, 03:58 PM
RE: Planning Final Hardware Phase - by Rob F - 12-05-2015, 06:22 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Robo-Tank Hardware Expansions Coming Soon Rob F 13 8,704 11-10-2019, 01:36 PM
Last Post: Rob F
  Robo-Tank 3rd Generation Hardware Rob F 42 36,006 06-24-2018, 07:14 PM
Last Post: Rob F
  Gen 2 Hardware Mod Required Rob F 1 4,785 12-19-2016, 04:10 AM
Last Post: Rob F

Forum Jump:

Current time: 05-02-2024, 05:55 PM