Posts: 355
Threads: 8
Likes Received:
12 in 12 posts
Likes Received:
12 in 12 posts
Reputation:
13
Joined: Dec 2015
Country:
12-17-2015, 02:29 AM
hi everybody,
quick question.
I've got a jebao RW8 wave maker which uses 24v and a 5v PWM signal for speed control
is it possible to connect the PWM signal to a lighting channel and to use it as a speedcontroller?
of course I know 24v is outside of the maximum, and I know I have to tie the 0v line of the wave maker to the 0v of the due in order to make the PWM work with a transistor.
since the controller has 16 lighting channels and I only plan on using 8 I was wondering if it is possible to do something like this.
kind regards,
wouter
Posts: 355
Threads: 8
Likes Received:
12 in 12 posts
Likes Received:
12 in 12 posts
Reputation:
13
Joined: Dec 2015
Country:
I don't mind testing.
But I don't have the controller since I don't have a tank to use it on yet.
I just wanted to know if it is possible since I will be using 1 or more wavemakers and PWM controlled pumps in the sump.
the normal controllers on the pumps work just fine but since this is such a fancy controller I'd love to also have control over my pumps actual speed.
regarding normal pumps you can use a normal lamp-dimmer and hook it up to a digital servo so you use the PWM of the arduino to control the servo which in his place controls the dimmer.
Posts: 3,250
Threads: 90
Likes Received:
163 in 120 posts
Likes Received:
163 in 120 posts
Reputation:
184
Joined: Sep 2015
Country:
Ah, no tank and no controller is a bit of problem. haha. I do remember you from plantedtank, I thought you had one. I'm happy you found your way over. Once you get a tank we'll make a deal. Maybe by then it will make actual waves. Using the LED channels you can only ramp up and down 6 times a day. I like the servo idea, there's no limits what can be done if you use your imagination.
Posts: 355
Threads: 8
Likes Received:
12 in 12 posts
Likes Received:
12 in 12 posts
Reputation:
13
Joined: Dec 2015
Country:
well I was hoping to exclude the light channels which I'm using for the wavemakers from the ramps, or at least set them to the same value around the clock so they don't shift in power during the day
Posts: 3,250
Threads: 90
Likes Received:
163 in 120 posts
Likes Received:
163 in 120 posts
Reputation:
184
Joined: Sep 2015
Country:
Without a small mod to the code the ramps would affect the wavemaker however you can set the speed the same on each ramp so it never changes.
Posts: 355
Threads: 8
Likes Received:
12 in 12 posts
Likes Received:
12 in 12 posts
Reputation:
13
Joined: Dec 2015
Country:
alright, well maybe when I finally got my new tank and controller it's already implemented :P otherwise I think I'm going to set the ramps all to the same setting