hi there

[Dice]

Hi!

So I'm Tom.
I'm new here. They asked me too create a account. En intriduse myself
I'm from belgium. Thats wy my englisch is so bad. :-p
I owne a reef tank. A juwel trigon 350. 
Lots off diy.
Lights
Drilled 3 holes. 1 upstream 1overflow and 1 emergency overflow.
Costum sump.
Dosingpump

Grtz Dice

---

[rott]

hi Tom and welcome I am Dale from ohio I really like your tank you did a nice job on it.
what do you use to control your dosing pumps now?

[Dice]

Hi Dale

Now i use a jebao dp4 (chinees)
But it was too big for my cabinet.
So i cut it in 2, extendet the whires and de origenal cpu hangs on the outside now. The dosingpumps on the inside. 



So i'm thinking of buying a complete kit preassebled. My solder skills are not so good.
all the features are great.
Only i need multyple dosing per pump in a day.
ato
And heating ore cooling when temp is to high ore low.
salinety probe
ph probe
These are realy importent for me. Is this possible?
Maybe in future updates?

Grtz Dice


Grtz Dice

[Rob F]

Hi Tom, welcome and thanks for posting your tank, it looks really nice, obviously your routine is working well. 

Out the things you would like currently you can only controller the heater via temperature, it turns the power outlet on/off when the temperatures are reached. You can also connect a salinity and ph stamp and probe from Atlas Scientific, its setup to work with the EZO stamps which you would need to purchase from Atlas. Currently you can only set one schedule per day for each of the four dosing pumps. I've been asked for more schedules per day so I will be doing that along with adding cooling fan control via temperatures. It will work the same as the heater turning the outlet on or off based on the temperature.

[rott]

yes I know the salinity probe is coming in a update soon If not all ready done as is ph ato I think is done or working on with using floats or optical switch's heating and cooling is just turning on your devices you all ready own

[Rob F]

All the probes work now, at least you'll get a real number. Because I don't know what decimals should be or if some are % so that will need to be tweaked once I know how it goes, but they do work.