Create a new file and name it wpa_supplicant.conf

[Dukereef]

Silly noob question.

I am following the instructions for adding a new file to the root directory but the only option I seem to have is add a new folder.
I am sure this is not correct, I have tried Dr Google but can seem to work it out.

What am I missing / doing wrong?

I have the overlays folder and lots of files, just can not seem to add one.
Help appreciated please.

thanks
Arron

---

sorry trying to do the following.

2. Enable Wireless Network On Raspberry Pi

---

Notepad.... I think is the one, looking at your examples.
fingers crossed.
thanks

---

OK - All I have as an oprtion is add Text Document... is this correct?

---

Found Notepad.... LOL ...... finger crossed.
thanks

[zee_zout]

Hi Dukereef,

Yes, this will work perfect with notepad, however make sure that your file extension is .conf and not .txt.

Kind regards,
Jimmy

[Rob F]

Yeah as Jimmy mentioned notepad will work good. When you create the new file it will be a .txt file, if you don't see that after the file name you have to enable a settings in Windows. Here's a write up on how to do that.

https://sawtoothsoftware.com/resources/k...s-explorer

[Dukereef]

Thanks for the reply - I have done this and loaded the new files on to the SD - put this in the Pi4 and run PuTTy and I can not find the IP address.
Logged in to my router - not there and tried Angry IP Scanner - does not work.
should i see the Pi in my computer?

Pi4 has red light on, green did a series of flashes, i read this is normal - only using USB C to power the Pi - is that correct.
everything else went fine.

[Rob F]

Make sure the file has your credentials and the country code is correct in the file you are creating.