180 Gal rebuild

[Steve S]

Rob or anyone else what 2 pins does the buzzer get soldered to pin 10 and some thing else ready to solder it and can not remember where it goes

Hey rott,

I asked Rob the same thing in a PM, so I'll just post his answer here.

Hi Steve, that buzzer attaches to the display Due. Sorry on the board you have I forgot to put a header for it but you can solder the wires directly to the display board.

The red wire goes to PWM pin 10 and the black goes to ground. No resistors are required.


I assume that you have the same boards...