09-10-2019, 11:39 AM
Hmm, these ports are good for 3amps, I've run that kind of load for a few hours with no heat or issues so I can't imagine it getting damaged, that value probably doesn't draw much power. Even if something happened the others should work.
Any chance you test them all before this happened?
Sounds like your are measuring correctly, positive probe on +12v and GND on 17, 18, 19, 20. When port is off the GND is lost so you should have 0v. For what it's worth can you try going to settings, system and press the "sync" button, also try pressing the "resume" button on home page dock. If this doesn't work I'll have to send you a sketch to test further.
Any chance you test them all before this happened?
Sounds like your are measuring correctly, positive probe on +12v and GND on 17, 18, 19, 20. When port is off the GND is lost so you should have 0v. For what it's worth can you try going to settings, system and press the "sync" button, also try pressing the "resume" button on home page dock. If this doesn't work I'll have to send you a sketch to test further.
