09-10-2019, 08:18 AM
I was able to turn on and off the solenoid. But after leaving it on for about 10 minutes, and updating the display SD card, I'm having an issue. It seems port 17, 18, 19, 20 are ALWAYS reading 11.4v regardless of the state of the DC accessories on the display.
Gen 3 - Plug 10 - Measuring across +12v to 17, 18, 19, 20
Assuming it should be zero when they are off. Possible that I'm not measuring correctly?
Gen 3 - Plug 10 - Measuring across +12v to 17, 18, 19, 20
Assuming it should be zero when they are off. Possible that I'm not measuring correctly?
