06-17-2019, 05:45 PM
No problem glad to hear you got it.
For the ports it's only labels that changed, if you look at face plate you see analog 1 - port 1. On yours analog 1 is still analog 1 so if yours is port 7 change it to port 1. If you called ATO main sensor port 2 just call it port 6 now. Everything else is the same.
Temps are slightly different because I called them water, air, light, temp 1,2,3,4. Now temp 1 = water, temp 2 = air, temp 3 = light, temp 4 = temp 1, temp 5 = temp 2.
https://www.robo-tank.ca/forum/Thread-Co...-Faceplate
For the ports it's only labels that changed, if you look at face plate you see analog 1 - port 1. On yours analog 1 is still analog 1 so if yours is port 7 change it to port 1. If you called ATO main sensor port 2 just call it port 6 now. Everything else is the same.
Temps are slightly different because I called them water, air, light, temp 1,2,3,4. Now temp 1 = water, temp 2 = air, temp 3 = light, temp 4 = temp 1, temp 5 = temp 2.
https://www.robo-tank.ca/forum/Thread-Co...-Faceplate