04-14-2019, 05:14 AM
(This post was last modified: 04-14-2019, 05:48 AM by fietsenrex.)
did the update, and restored to defaults.
but in the system setting menu it says the version is still 5.00
only issue that remains for now (during set-up) is the light modes menu that sometimes freezes during setting up the lights.
but my guess is that once the I2C buffer is here and the PH and RTC are fitted to the buffer this will be solved
only running port 9, 10, 11, 14, 21, 22, 23, 24 and 4 LED channels
no DC, ATO or web enabled since it's not in use.
if I win the lotery I'm going to purchase a 128MB class 10 SD card just to see if it loads the images instantly :P
Don’t know what changed But the temperature has a full degree swing..
It jumps from 25 to 26 and back, in 4.2 and 5.10 this was only .3 degrees
but in the system setting menu it says the version is still 5.00
only issue that remains for now (during set-up) is the light modes menu that sometimes freezes during setting up the lights.
but my guess is that once the I2C buffer is here and the PH and RTC are fitted to the buffer this will be solved
(04-12-2019, 06:25 PM)Rob F Wrote: No lol... I only got over 10,000 with all sensors disabled and most equipment, unreal scenario. You'll be around what you were when you disabled before.26.218 checks per second...
only running port 9, 10, 11, 14, 21, 22, 23, 24 and 4 LED channels
no DC, ATO or web enabled since it's not in use.
if I win the lotery I'm going to purchase a 128MB class 10 SD card just to see if it loads the images instantly :P
Don’t know what changed But the temperature has a full degree swing..
It jumps from 25 to 26 and back, in 4.2 and 5.10 this was only .3 degrees