04-09-2019, 05:24 PM
(04-09-2019, 01:01 PM)Dom59 Wrote: Hi Rob,
Now controller seems running, I try to set it up. But I do not understand how lights run.
Ok when a mode increase, but how to proceed on evening to make mode decrease?
E.g. : at 9pm duration 1hour and 25%. It will increase from 0 to 25...
How many light modes did you create? It works the same as 4.2 but you aren't stuck with 6 modes. For example, mode 1 = 0%, mode 2 = 10%, mode 3 = 50%, mode 4 = 10%, mode 5 = 0%. That will dim the lights up to 50% and then back down to 0%.
(04-09-2019, 01:17 PM)fietsenrex Wrote: Ah ok swapping feeder and dosing is fine by me.
Just had another issue...
Lights were still in mode 4 (high sun) while the display showed 6 (almost night setting).
Set it by hand to 6 in the light menu and hit resume and it stayed at 6.
Don’t know what happend or if it is recurring, yesterday was fine
As an addition, mode 6 and 7 are complete off, while they Should be the same as mode 1 and 2 regarding light output.
Power is still on But there is no light
Hmm, so if you go to light modes page and press 6 or 7 they go off but if you go to another mode they are correct? Did you try deleting mode 6 and 7 and creating them again? I just discovered a glitch when you delete a mode, if you press and hold delete it'll beep but if you let go them the mode won't be deleted, just hold the button till the screen redraws.