02-13-2019, 03:58 PM
Hi Rob
Finally got it to load and start but having loads of problems.
The heaters will not turn off according to the set temps, I have set them to turn off at 26c but they just stay on no matter what the temp is (sitting at 26.6 at the moment), I have tried setting up a custom rule to turn them off if the temp is over 26 but that does not work either. I have checked it is looking at the right port (9) and it is reading right on the home page.
The ATO is not working, it keeps dumping water into the sump even though it is over full.
Flow meter display is wrong, I have set it to the right pulses (4.5) but it only reads 50lph when it should be more like 950plh.
Home page will not display properly either, issues with feeding not showing etc.
Finally got it to load and start but having loads of problems.
The heaters will not turn off according to the set temps, I have set them to turn off at 26c but they just stay on no matter what the temp is (sitting at 26.6 at the moment), I have tried setting up a custom rule to turn them off if the temp is over 26 but that does not work either. I have checked it is looking at the right port (9) and it is reading right on the home page.
The ATO is not working, it keeps dumping water into the sump even though it is over full.
Flow meter display is wrong, I have set it to the right pulses (4.5) but it only reads 50lph when it should be more like 950plh.
Home page will not display properly either, issues with feeding not showing etc.
