12-30-2018, 05:09 AM
(This post was last modified: 12-30-2018, 05:33 AM by Gordon Lehmann.)
I‘m very interested in Robo tank!
Because it’s very fine and looks like easier then build up my own arduino tank controller.
I’ve two Aqua Light LED lamps and two Aqua Medic Ocean Twin LED lamps I know the Vorlage from Original Controller I want to control and there is in my sump one more LED lamp aqua Medic reef led the voltage I must get out of the original controller
complete I have to control 10 LED channels
Then I need 4-6 dosing Pumps i have
then I urgently need a few floating switches because I have already come several times wire algae in the back valve and the sump
has overflowed so when the dc pump is restarted and another floating switch at a certain water level, the skimmer off so that does not overflow continuously
then I have to adjust it so when the feeding time is over start the skimmer only 2 minutes
after the dc pump starts.
I've already bought a lot of modules and accessories to build my own arduino together but I still have to learn c plus plus and you can certainly help with some programming things.
Since I have not found any other controller that you can customize as far as the robo tank I'm very excited
but there are a few other things but everything in his time
is there a detailed assembly instruction for the diy kits !?
Can I change Display language to German ?
Because it’s very fine and looks like easier then build up my own arduino tank controller.
I’ve two Aqua Light LED lamps and two Aqua Medic Ocean Twin LED lamps I know the Vorlage from Original Controller I want to control and there is in my sump one more LED lamp aqua Medic reef led the voltage I must get out of the original controller
complete I have to control 10 LED channels
Then I need 4-6 dosing Pumps i have
then I urgently need a few floating switches because I have already come several times wire algae in the back valve and the sump
has overflowed so when the dc pump is restarted and another floating switch at a certain water level, the skimmer off so that does not overflow continuously
then I have to adjust it so when the feeding time is over start the skimmer only 2 minutes
after the dc pump starts.
I've already bought a lot of modules and accessories to build my own arduino together but I still have to learn c plus plus and you can certainly help with some programming things.
Since I have not found any other controller that you can customize as far as the robo tank I'm very excited
but there are a few other things but everything in his time
is there a detailed assembly instruction for the diy kits !?
Can I change Display language to German ?
