12-28-2017, 05:51 AM
Well there was a few issues with 4.10 so I've updated the download package with the fixes so you can download it again. If you already updated and it didn't work or you had issues you only need to upload the sketches to display and controller otherwise follow the instructions.
The biggest problem was with the web, if you had the network disabled it would try to connect not long after the controller started up and go in a loop forever, if you were plugged into your router everything would have been ok. The screen is locked when the controller connects to the network because during that process the controller is locked up and if you're adjusting settings at that time it can cause issues that's why some of you had no touch.
The 2nd problem was with the ATO, I made some changes but didn't wait the hour to make sure it worked when not in test mode, turns out it didn't and only the test mode was working. It should be ok again.
The 3rd problem was with the custom labels, I had the air and light temperatures mixed on various screens.
And finally when I redid the outlet schedules I didn't block the schedules if the outlet was in manual mode, now its ok.
If you come across something else let me know.
The biggest problem was with the web, if you had the network disabled it would try to connect not long after the controller started up and go in a loop forever, if you were plugged into your router everything would have been ok. The screen is locked when the controller connects to the network because during that process the controller is locked up and if you're adjusting settings at that time it can cause issues that's why some of you had no touch.
The 2nd problem was with the ATO, I made some changes but didn't wait the hour to make sure it worked when not in test mode, turns out it didn't and only the test mode was working. It should be ok again.
The 3rd problem was with the custom labels, I had the air and light temperatures mixed on various screens.
And finally when I redid the outlet schedules I didn't block the schedules if the outlet was in manual mode, now its ok.
If you come across something else let me know.