Robo-Tank v6.6 is Ready

[pwest]

Hi Phil, thanks for the donation through the app, at least that feature works. 

I use several software products like this that I don't have to pay for, but that have an easy paypal contribution feature.  At the end of each year, I send each author some money loosely based on how much I've used the software and how much support I've gotten.

When the controller boots up it scans the I2C bus and adds what it sees that's why you have the pH showing. At the moment you can't disable it through the interface but you can do it in the database. Here's how.

• Log into the database like you previously did.
  
• Click on the table "probes" on the left side. If you don't see the tables you have to click on "robotank" database.
  
• You'll see one record, edit it and change "plugged" to 0.
  
• Reboot the controller and it should be gone.
  

Thanks, R

This worked, except the Probe1 graph still wants to exist, probably because I disabled the probe, but didn't delete the database line.  Is there a way to remove it from the list of charts, or should I just ignore it?

-Phil