06-24-2023, 09:51 PM
Hi Phil, thanks for the donation through the app, at least that feature works. 
When the controller boots up it scans the I2C bus and adds what it sees that's why you have the pH showing. At the moment you can't disable it through the interface but you can do it in the database. Here's how.
When the controller boots up it scans the I2C bus and adds what it sees that's why you have the pH showing. At the moment you can't disable it through the interface but you can do it in the database. Here's how.
- Log into the database like you previously did.
- Click on the table "probes" on the left side. If you don't see the tables you have to click on "robotank" database.
- You'll see one record, edit it and change "plugged" to 0.
- Reboot the controller and it should be gone.
