I added couple new values to graph. one of them is Watt hours (just like Kilowatt per hour, but using watts instead of kilowatts, because in aquarium use values are quite small. So i get about 0.23 kWh or 230 Wh and i like to show them bigger values so i select watts. But if somebody thinks this is bad idea it is very fast to change show kWh (also new icon must be made) .
Also in this "Wh" graphs i encounter little challenge. Rob graph function saves values every 8.35 minutes. And when we are dealing with "watts per hour" it is logical to save this value only once in hour.
So i done it (don't worry, all other values is still writen in every 8.35 minutes, i don't touch this function at all :) So now Wh value is saved once in hour, but because graph is designed to show 7 lines per hour, it may look odd to show only one. But there is picture of how it look when saves once in hour.
And this picture shows how it looks like when it writes value every 8.35 minutes. Like you see it start with zero every hour and start climb bigger and bigger, so it form like "step" pattern. There is picture of it. Those data values is not the same in both screens so don't look that :)
What you guys think, which way is the better ? I can change it easily to use this "8.35" way also :)
There is picture of current graph menu icons that i added. Total Cost icon shows euro sign or dollar sign, it depends which currency icon you have select in Energy meter settings. That total consumption screen shows aquarium total consumption in kWh (and it can be reset in Energy meter screen)
Euro / dollar sign switch also top of total cost screen. There is still some adjustment to done, like switch total cost value to shows more decimals than one etc...
And there is little video which shows how signs change.
https://www.youtube.com/watch?v=wYcsgK4Yglo
Also in this "Wh" graphs i encounter little challenge. Rob graph function saves values every 8.35 minutes. And when we are dealing with "watts per hour" it is logical to save this value only once in hour.
So i done it (don't worry, all other values is still writen in every 8.35 minutes, i don't touch this function at all :) So now Wh value is saved once in hour, but because graph is designed to show 7 lines per hour, it may look odd to show only one. But there is picture of how it look when saves once in hour.
And this picture shows how it looks like when it writes value every 8.35 minutes. Like you see it start with zero every hour and start climb bigger and bigger, so it form like "step" pattern. There is picture of it. Those data values is not the same in both screens so don't look that :)
What you guys think, which way is the better ? I can change it easily to use this "8.35" way also :)
There is picture of current graph menu icons that i added. Total Cost icon shows euro sign or dollar sign, it depends which currency icon you have select in Energy meter settings. That total consumption screen shows aquarium total consumption in kWh (and it can be reset in Energy meter screen)
Euro / dollar sign switch also top of total cost screen. There is still some adjustment to done, like switch total cost value to shows more decimals than one etc...
And there is little video which shows how signs change.
https://www.youtube.com/watch?v=wYcsgK4Yglo
