Now made little adjustments (and need little tweak still, like lift up all values about 1 or 2 pixels etc.), and code to calculate each outlet is ready and placed, but currently not used. this outlet screen shows only total data values, because i cant test those separate datas before i get my i2c chip order. But when i get, it is about 2 minutes job, to change each outlet show correct outlet data.
Each outlet peak and total consumption can be reset by pressing current value 2 second. Outlet total consumption value will be cleared in screen and graphs, but it still are calculated whole system total consumption (previous sceen) If want to reset all, it have to do that screen by pressing total consumptions 2 seconds.
Also i added previous screen (which show system total consumptions, prices, etc ) box/value which shows when system total consumption is reset, so you don't have remember it or write it down etc...
Because there is not very much space left in the screen, i have to add back "button/function) to top of the sceen. So press that logo before Energy Meter takes you back previous screen.
Each outlet peak and total consumption can be reset by pressing current value 2 second. Outlet total consumption value will be cleared in screen and graphs, but it still are calculated whole system total consumption (previous sceen) If want to reset all, it have to do that screen by pressing total consumptions 2 seconds.
Also i added previous screen (which show system total consumptions, prices, etc ) box/value which shows when system total consumption is reset, so you don't have remember it or write it down etc...
Because there is not very much space left in the screen, i have to add back "button/function) to top of the sceen. So press that logo before Energy Meter takes you back previous screen.
