12-30-2021, 11:13 AM
@Rob, I personally really like the repackaged version, and all things considered, the RJ45 sockets don't bother either.
The output current limitation per port, with only 4 or 5 A total, could be quite frustrating though.
Especially when powering the module at 12V, the fifteen or so watts available per output would severely limit the handling of the rising or circulating pumps.
At this point, external power mosfets or relays would need to be provided, and this could be troublesome.
Do you foresee any possible solution besides bypassing with a short circuit these Schottky, effectively eliminating the protection offered?
The output current limitation per port, with only 4 or 5 A total, could be quite frustrating though.
Especially when powering the module at 12V, the fifteen or so watts available per output would severely limit the handling of the rising or circulating pumps.
At this point, external power mosfets or relays would need to be provided, and this could be troublesome.
Do you foresee any possible solution besides bypassing with a short circuit these Schottky, effectively eliminating the protection offered?
