07-23-2021, 08:35 AM
Hi Deliabiba, glad it arrived, I guess the best way is to start slowing getting different systems online which will help give a better understanding of how it works.
If you haven't installed reef-pi yet this link explains how.
https://docs.google.com/document/d/1t9ma...5qkcuznso3
Maybe start with the temperature and pH as those aren't too difficult to get running, if you need specifics let me know. This page goes over the pH.
https://docs.google.com/document/d/1uFP4...=h.37m2jsg
I'm not sure about your light, I did a quick search and didn't see anything about external controller, looks like theirs is wifi so it might not be compatible, if you have a link, maybe I'm looking at the wrong one.
EC and flow meter aren't supported by reef-pi at this time but I'm working on an app that will support them so those might have to wait a little bit.
Here's a link showing how to wire the Eheim feeder, sorry I'm unsure about the Sera, hopefully it works like the Eheim and you can find connection points with a volt meter.
https://www.robo-tank.ca/Connect_Eheim_Auto_Feeder
If you haven't installed reef-pi yet this link explains how.
https://docs.google.com/document/d/1t9ma...5qkcuznso3
Maybe start with the temperature and pH as those aren't too difficult to get running, if you need specifics let me know. This page goes over the pH.
https://docs.google.com/document/d/1uFP4...=h.37m2jsg
I'm not sure about your light, I did a quick search and didn't see anything about external controller, looks like theirs is wifi so it might not be compatible, if you have a link, maybe I'm looking at the wrong one.
EC and flow meter aren't supported by reef-pi at this time but I'm working on an app that will support them so those might have to wait a little bit.
Here's a link showing how to wire the Eheim feeder, sorry I'm unsure about the Sera, hopefully it works like the Eheim and you can find connection points with a volt meter.
https://www.robo-tank.ca/Connect_Eheim_Auto_Feeder
