06-27-2021, 07:26 PM
It looks like it happened at 23:11 pm, and i tracked my home assistant logs and don't find anything wrong.
The probe did calibate ok, and i was giving good values within the threshold for a few days. The probe was 90% submerged, the top was not submerged. I took it out even more now it is 50% submerged.
I dont have the controller mounted properly just yet as a few things are still not working the way it should. So i have it temporary running on the top of the tank like the picture shows, beside 2 temperature probes.
On the backside of the glass there is a MP40, it isn't AC but could cause some interference.
I will calibrate it again and submerge only the tip and see what happens.
Also I have changed course, and will not use HA to control it, and will change and use RP to create macros and use HA to collect data and send alarm only.
Thanks.
The probe did calibate ok, and i was giving good values within the threshold for a few days. The probe was 90% submerged, the top was not submerged. I took it out even more now it is 50% submerged.
I dont have the controller mounted properly just yet as a few things are still not working the way it should. So i have it temporary running on the top of the tank like the picture shows, beside 2 temperature probes.
On the backside of the glass there is a MP40, it isn't AC but could cause some interference.
I will calibrate it again and submerge only the tip and see what happens.
Also I have changed course, and will not use HA to control it, and will change and use RP to create macros and use HA to collect data and send alarm only.
Thanks.
