02-06-2019, 04:41 PM
There is no folder for weather, you just need to add your OpenWeather API key code in the controller sketch. For the email alerts you enter the data on the system settings page. I forgot the API key that's why it's not there but will be later.
For the port numbers you can get it from the new faceplate. Here's a link. For everything start with the first port on your controller and it'll be the same as the first port for same type on faceplate. For example water temp is the first temp port on Gen 2, that would be "temp 1 / port 9" in the software.
https://www.robo-tank.ca/forum/Thread-Co...-Faceplate
For the port numbers you can get it from the new faceplate. Here's a link. For everything start with the first port on your controller and it'll be the same as the first port for same type on faceplate. For example water temp is the first temp port on Gen 2, that would be "temp 1 / port 9" in the software.
https://www.robo-tank.ca/forum/Thread-Co...-Faceplate
