02-26-2019, 02:19 AM
Sorry everyone another update to do, v5.04 and password is the same. There's one image but the others are still there so copy all 9 or whatever.
On this one I removed temperature compensation for ORP as its not required.
For the ATO I redid everything and removed that crazy setting for how often the ATO sensor should be checked so on the display you'll have an empty box now.
Instead there's just a 60 second stability timer for turning it on. This means the sensor must in the on position for 60 seconds before the ATO turns on, and the sensor must be in the off position for 5 seconds before its turned off. If the sensors was saying on for 10 seconds and a reading came in showing off the timer would reset. The sensors are checked in real time, if you set the ATO in "Test Mode" you'll see it's in real time as it ignores those timers.
On this one I removed temperature compensation for ORP as its not required.
For the ATO I redid everything and removed that crazy setting for how often the ATO sensor should be checked so on the display you'll have an empty box now.
Instead there's just a 60 second stability timer for turning it on. This means the sensor must in the on position for 60 seconds before the ATO turns on, and the sensor must be in the off position for 5 seconds before its turned off. If the sensors was saying on for 10 seconds and a reading came in showing off the timer would reset. The sensors are checked in real time, if you set the ATO in "Test Mode" you'll see it's in real time as it ignores those timers.
