02-24-2019, 02:41 AM
You can download v5.03 from your account now, password is the same. This one has some images for the display SD. This fixes a couple visuals errors on the home page and the starting minimum value for ph, orp, do and ec probes is captured now, it was stuck at 0 until you did a min/max reset.
There's also a setting on the probes hardware page to select a temperature sensor to update the circuits with for temp compensation. You might also notice some extra calibration screens, that's still in progress so you can't calibrate just yet.
I also changed how the sensor data is sent to the display which could have caused random errors, if you have the flow meters on the home page in the bottom of the 3rd column you may have noticed a long number appear on the 2nd flow meter, that shouldn't happen now.
There's also a setting on the probes hardware page to select a temperature sensor to update the circuits with for temp compensation. You might also notice some extra calibration screens, that's still in progress so you can't calibrate just yet.
I also changed how the sensor data is sent to the display which could have caused random errors, if you have the flow meters on the home page in the bottom of the 3rd column you may have noticed a long number appear on the 2nd flow meter, that shouldn't happen now.
