02-14-2019, 11:33 PM
Let me put it this way, I didn’t update yet so no experience with v5.x
But with V4.2 when you switch from F to C the values aren’t changed by them self.
So if the controller is set to switch on @70F and of @77F and you change it to C the controller will switch on below 70C and switch off @77C
So you need to change those values as well
But with V4.2 when you switch from F to C the values aren’t changed by them self.
So if the controller is set to switch on @70F and of @77F and you change it to C the controller will switch on below 70C and switch off @77C
So you need to change those values as well