04-13-2023, 10:18 PM
Hi Blake, thanks for dropping in and welcome back. :)
It looks like you could get away with the basic controller and an AC power bar, I assume you don't have any 12v DC equipment? If you do add dosing pumps you would need the equipment extension as that has 6 DC ports for small DC devices such as those.
The light wouldn't be compatible, you could only turn it on/off via an AC outlet. Not many lights are external controller friendly.
TDS is possible but it's expensive and would need to mess with some code. The Atlas conductivity circuit puts out a TDS value so I think it should work.
https://atlas-scientific.com/kits/conduc...k-1-0-kit/
With this you're getting close to $500 when all said and done unless you already have a Raspberry Pi, microSD card, power supply and some other cables.
It looks like you could get away with the basic controller and an AC power bar, I assume you don't have any 12v DC equipment? If you do add dosing pumps you would need the equipment extension as that has 6 DC ports for small DC devices such as those.
The light wouldn't be compatible, you could only turn it on/off via an AC outlet. Not many lights are external controller friendly.
TDS is possible but it's expensive and would need to mess with some code. The Atlas conductivity circuit puts out a TDS value so I think it should work.
https://atlas-scientific.com/kits/conduc...k-1-0-kit/
With this you're getting close to $500 when all said and done unless you already have a Raspberry Pi, microSD card, power supply and some other cables.